© Adam Equipment Company 2004
7
[Limit]
It sets the limits for check
weighing and allows setting of
either the low limit or the high
limit or both.
A secondary function
is available to move the active digit
to the right when setting values for
parameters or other functions.
[%]
It enters the percent weighing
function. Allows the weight,
unit weight, and count to be
seen when parts counting.
A secondary function is
available to move the active digit to
the left when setting values for
parameters or other functions.
[Func]
This is used to select the
function of the scale. When
the scale is weighing, it will
select parts counting. When it
is not in the weighing mode it
will return the user to weighing.
A secondary function [C] is
available to act as a clear key
when setting values for parameters
or other functions.
[Print]
It is used to print the results to
a PC or printer using the
optional RS-232 interface. It
also adds the value to the
accumulation memory if the
accumulation function is not
automatic.
A secondary function [ESC] is
used to return to normal operation
when the scale is in a parameter
setting mode.
[Units]
It is used to change the
weighing units of the display
from kilograms to grams and
back to kilograms for CBW
series.
For CBWa scales this key will
select
kilograms,
grams,
Pounds and Pounds/ounces
for the weighing unit, if
enabled. This should only be
done in gross weighing or at
zero.
None.
