www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk
2.3.2.3 Test Procedure
This menu is very important for healthy test conditions and results.
Your test is dependent on these adjustments.
Firstly you should select the control type, in this section you have three options
Load, Position and Stress
but currently Load and Stress controls are active. For most tests
load control is used as first option but different type of the tests can require other control
options.
Procedure Mode:
In this tab you will see two options
Simple Mode
and
Combined Mode.
Simple Mode:
In this mode you can make a simple ramp control by adjusting the
actuator’s speed in KN/s.