T
ROUBLESHOOTING
24
Problem / Warning
Potential Cause
Solution
Excessive Vibration
Loose Hardware
Inspect for and tighten any
loose hardware.
Damaged or dirty
propellors
Replace cracked or
chipped propellers.
Clean dirty propellers.
Misaligned landing skids
Loosen ground skid
T-connector screws and
rotate skids to align.
Retighten screws.
Loose payload
Ensure that all payloads
are secure before flight.
“Compass Inconsistent”
GPS not deployed
Lock GPS mounts in their
upright positions.
“Hardware Safety Switch”
Aircraft not armed
Long press Arm/Safety
button on flight controller
cover between batteries.
“Waiting for GPS” or
“GPS Glitch”
Overhead obstructions
Move aircraft to an outdoor
area with a clear view of
the sky.
“Heater Temp Low”
Flight controller still
warming up
Wait for built-in heater to
reach target temperature.
“Throttle too high”
Flight Mode is Stabilize
Change flight mode to Pos-
Hold or Alt-Hold.
For preflight warnings not list above, please refer to
