UNDERSTANDING THE CONTROL PANEL
12
2
1
5
3
2
4
6
7
1. Ground (earth) terminal. (See page 11.)
2. AC sockets which supply rated output.
3. The Oil alert system is designed to prevent
engine damage caused by an insufficient
amount of oil in the crankcase. Before the oil
level in the crankcase can fall below a safe
limit, the Oil Alert indicator light comes on
and the Oil Alert system automatically will
stop the engine (the engine On/Off switch
will remain in the ON position). If the engine
stops or the Oil Alert indicator light comes
on when you pull the starter grip, check the
engine oil level.
4. AC power indicator light (green). It indicates
that the generator is producing electrical
power at the sockets.
5. Economy control switch. When turned to the
ON position the economy control unit
controls the engine speed according to the
connected load. The results are better fuel
consumption and less noise.
6. Engine switch. When the engine switch is in
the STOP position the engine will not run.
7.
If the generator is overloaded (in excess of
1800W), or if there is a short circuit in a
connected appliance, the engine overload
indicator light (red) will go ON. The engine
overload indicator light (red) will stay ON,
and after several seconds, current to the
connected appliance(s) will shut off, and the
indicator light (green) will go OFF.
Summary of Contents for IM1800IFG
