background image

Ordering

1.  Scan your order into the ScanTel

®

 Opticon scanner.

2.  Be sure you are connected to the Internet using Dial-up networking 

if necessary. If you have a dedicated Internet connection, this is 
always true.

3.  Make sure your ScanTel

®

 Opticon scanner communication cable is 

connected to your computer.

4.  Under the Options make sure to select proper scanner model:   

 

ScanTel

® 

CS15xx.

5.  Start the WebPush application. The program installed by default 

under Start Menu/Programs/WebPush/impush.

6.  Follow the directions in the WebPush application. It will lead you 

through the process of sending your order to Imperial.

7.  When you receive a link to your order, click it to review the order in 

your web browser.

8.  After clicking the link for your order, review it on the web site. You 

must be sure to maintain the order and then check it out.

9.  You must “CHECK OUT” your order on the web or Imperial  

WILL NOT process your order!

10.  Done! Your order will be packed and shipped as soon as possible  

after check out.

Should you experience any problems or questions,  

please contact Imperial’s Customer Service Department.

1-800-558-2808

3

6

Charging the Batteries

The ScanTel

®

 Opticon contains a rechargeable lithium ion battery. 

To charge the battery, connect the USB cable to your PC computer. 
Connect the other end of the USB cable into the port on the side of the 
scanner. The battery will charge via the USB cable. 

NOTE:   DO NOT LEAVE THE SCANNER ON THE USB CABLE  

TO CHARGE FOR EXTENDED PERIODS OF TIME.  
THIS WILL DESTROY THE BATTERY.

Low Battery Warning

The ScanTel

®

 Opticon will indicate a low power state to the user by 

blinking the LED indicator red while trying to scan a barcode.

Audio Control

To toggle the beeper tone on or off, press and hold the large button for 
10 seconds until the LED indicator turns solid amber (beeper tone off)  
or until the LED turns solid amber and a double tone is heard (beeper 
tone on).

Cleaning

Clean the ScanTel

®

 Opticon with a soft, clean cloth. Do NOT use any 

solvent such as alcohol or any abrasive substances.

USB cable

ScanTel

® 

 Opticon Scanner

Reviews: