CAMERAS FRAME GRABBERS IMAGING SOLUTIONS
BOBCAT Hardware User’s Manual
IMPERX
Rev. 2.0.9
6421 Congress Ave.
4/8/2014
Boca Raton, FL 33487
www.imperx.com
+1 (561) 989-0006
107 of 329
2.1.2 Normal Mode – Dual Output
When operating in a dual output mode, the image is split in two equal parts, each
side consisting of half of the horizontal pixels and the full vertical lines. The first
(left) half of the pixels are shifted out of the HCCD register towards the left video
amplifier – Video L, while the second (right) half of the pixels are shifted towards
the right video amplifier – Video R (Figure 2.2). In the horizontal direction the first
half of the image appears normal and the second half is left/right mirrored. The
camera reconstructs the image by flipping the mirrored portion and rearranging the
pixels. Dual output is the default factory mode of operation – refer to the
Configuration Memory section. The image resolutions for different cameras are
shown in Table 2.1, and a frame rates – in Table 2.2.
Figure 2.2 – Dual output mode of operation.
