ASSEMBLY INSTRUCTIONS
STEP 1
Join the front stabilizer (B) with
main frame (A) by 2 carriage bolt
(37), 2 arc washer (38), 2 dome
nut (39) to secure and then tight
firmly by open wrench (103)
STEP
2
Connect the hand pulse middle
wire (90) in front frame and the
hand pulse lower wire (88) in rear
frame first, then join the front
frame (A) and Rear Frame (C) by
4 Allen screws to secure (2 on
each side) and Then put the Allen
bolts (47) lock into the two holes
on top of the frame,then using
Allen key (102) to tight firmly.
2
1
37
38
39
103
1
50
40
102
21 56
STEP
3
Join the rear stabilizer (D) with
rear frame (C) by 2 carriage bolts
(37), 2 arc washer (38), 2 dome
nut (39) to secure, then firmly
tight by open wrench (103).
58
37
3938
50
103
5
