background image

IMPEX INC. 

 

LIMITED WARRANTY 

 

 

IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under 
normal use and service conditions, for a period of  two years on the Frame from the date of purchase.   
This warranty extends only to the original purchaser.   IMPEX's obligation under this Warranty is 
limited to replacing or repairing, at IMPEX's option. 
 
All returns must be pre-authorized by IMPEX.  Pre-authorization may be obtained by calling IMPEX 
Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be 
prepaid by the customer.  This warranty does not extend to any product or damage to a product 
caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not 
provided by a IMPEX authorized service center or for products used for commercial or rental purposes.  
No other warranty beyond that specifically set forth above is authorized by IMPEX. 
 
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in 
connection with the use or performance of the product or other damages with respect to any economic 
loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, 
installation or other consequential damages or whatsoever natures.   Some states do not allow the 
exclusion or limitation of incidental or consequential damages.  Accordingly, the above limitation may 
not apply to you. 
 
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties 
of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms 
set forth herein.  Some states do not allow limitations on how long an implied warranty lasts.   
Accordingly, the above limitation may not apply to you. 
 
This warranty gives you specific legal right.   You may also have other rights which vary from state to 
state. 

Register on-line www.impex-fitness.com 

 

IMPEX INC. 

14777 Don Julian 

City of Industry, CA  91746 

 

 

ORDERING REPLACEMENT PARTS 
 
Replacement parts can be ordered by calling our Customer Service Department toll-free at 

1-800-999-

8899

 during our regular business hours:  Monday through Friday, 9 am until 5 pm Pacific standard 

time. 

info@impex-fitness.com 

 
When ordering replacement parts, always give the following information. 
 
1. Model 
2. 

Description of Parts 

3. Part 

Number 

4. 

Date of Purchase 

 

12 

Summary of Contents for APEX WM-348.1














Reviews: