background image

 
 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN...................................................................................... 

IMPORTANT SAFETY NOTICE....................................................................... 

HARDWARE PACK……….....…....................................................................... 

ASSEMBLY INSTRUCTIONS........................................................................... 

EXPLODED DIAGRAM.........................................................................………. 

PARTS LIST…………………………………………………………………………. 

10 

WARRANTY.................................................................................................… 11 
ORDERING PARTS......................................................................................... 

11

 

 

 
 
 
 
 
BEFORE  YOU  BEGIN 

 

Thank you for selecting the APEX Bench AX-697 by IMPEX INC.  For your 
safety and benefit, read this manual carefully before using the machine.   As a 
manufacturer, we are committed to provide you complete customer 
satisfaction.  If you have any questions, or find there are missing or damaged 
parts, we guarantee you complete satisfaction through direct assistance from 
our factory.  To avoid unnecessary delays, 

please call our  TOLL-FREE 

customer service number.  

Our Customer Service Agents will provide 

immediate assistance to you.

 

 

 
 
 
 
 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

info@impex-fitness.com

 

Summary of Contents for AX-697













Reviews: