background image

 
 
 

 
 
TABLE OF CONTENTS 

 

BEFORE YOU BEGIN....................................................................................………..  1 
IMPORTANT SAFETY NOTICES...................................................................……….. 2 
HARDWARE PACK……….....….....................................................................……….. 4 
ASSEMBLY INSTRUCTIONS.........................................................................……….. 7 
PARTS LIST………………………………………………………………………………….. 18 
RESISTANCE CHART………….......................................................................………. 19 
WARRANTY.................................................................................................…………. 20 
ORDERING PARTS.......................................................................................………… 20

 

 
 

 
 
 
 
BEFORE YOU BEGIN 
 

Thank you for selecting the MARCY DIAMOND MD-1559 HOME GYM by 
IMPEX

®

 INC. For your safety and benefit, read this manual carefully before 

using the machine. As a manufacturer, we are committed to provide you 
complete customer satisfaction. If you have any questions, or find there are 
missing or damaged parts, we guarantee you complete satisfaction 
through direct assistance from our factory. To avoid unnecessary delays, 

please call our TOOL-FREE

 

customer service number

. Our Customer 

Service Agents will provide immediate assistance to you. 
 

Toll-Free Customer Service Number 

1-800-999-8899 

Mon. – Fri. 9 a.m. – 5 p.m. PST 

www.impex-fitness.com 

info@impex-fitness.com 

 

 

Summary of Contents for MARCY DIAMOND MD-1559






















Reviews: