©IMPEX INC. www.impex-fitness.com
7
Guide Rod Installation
The Guide Rods (#12) has holes on the rod to lock the weight stack
when not in use. The shorter end of the guide rod with the lock hole
will need to be pointed downwards towards the Rear Base (#1).
Weight Plate Installation
Slide weight plates onto Guide Rod from top to
bottom. The deep groove
on each weight plate
needs to
face BACK and DOWNWARDS.
Deep Groove
CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out of use until
repair.
6.
Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum user weight: 300 lbs.
2. Assembled Dimension: 67” x 39” x 83”
