Impex MARCY MWM-7150, Owner'S Manual

 
ASSEMBLY INSTRUCTION 

Tools Required for Assembling the Machine:  Two Adjustable Wrenches and 
Allen Wrenches. NOTE:  It is strongly recommended that two or more people 
assemble this machine to avoid possible injury. 
 
STEP 1     (See Diagram 1) 

A.) 

Do not tighten the nuts and bolts until instructed to do so.

B.)  Slide two Ø 2 ½” x 1” Rubber Bumpers (#33) onto the Guide Rods (#10).  Insert 

the two Guide Rods into the holes on the Rear Base Frame (#5). Secure each 
Guide Rod with one M10 x 1” Allen Bolt (#47) and 

∅

 ¾” Washer (#59) from the 

bottom. 

C.)  Attach the rear of Main Frame (#1) to the Rear Base Frame. Secure them with two 

M10 x 2 ¾” Carriage Bolts (#46), one U-shaped Bracket (#16), two Ø ¾” Washers 
(#59), and two M10 Aircraft Nuts (#56).  

D.)  Attach the Front Post (#6) to the Main Frame. Secure them with two M10 x 2 ¾” 

Carriage Bolts (#46), one 4 ¾” x 2” Bracket (#18), two Ø ¾” Washers (#59), and 
two M10 Aircraft Nuts (#56).   

E.)  Attach the Seat Support (#17) onto the Main Frame. Secure them with two M10 x 

2 ¾” Carriage Bolts (#46), one 4 ¾” x 2” Bracket (#18), two Ø ¾” Washers (#59), 
and two M10 Aircraft Nuts (#56).  

F.)  Attach the Foot Plate (#14) onto the Front Post. Secure it with two M10 x 5/8” 

Allen Bolts (#48) and two Ø ¾” Washers (#59). 

7