© IMPEX INC. www.marcypro.com
16
COMPUTER
FUNCTIONS AND OPERATIONS
(Battery not included)
MODE/RESET
– To select functions,
press and release “Mode/Reset
button”.
– To reset, press and hold for two (2) seconds to reset time, distance and calories.
1. SCAN:
Press MODE button until “▼” appears at SCAN position, monitor will cycle through the following
functions: time, speed, distance, calories and odometer. Each will be displayed for 6 seconds.
2. TIME:
Display the elapsed time. Max value is up to 99:59.
3. SPEED:
Display the current speed in miles per hour.
4. DISTANCE:
Display the distance traveled in Miles. Max value is 999.99 miles.
5. CALORIES
:
Display the calorie consumption in cal.
6. ODOMETER:
Display the accumulation of distance from previous and current exercises. Max value is
9999 miles.
NOTE
：
1.
If the display is faint or shows no figures, please replace the batteries.
2.
The monitor will automatically shut off if there is no signal received after 4 minutes.
3.
The monitor will be auto powered on when starting to exercise push button signal in.
4.
The monitor will automatically start calculating when you start to exercise and will stop calculating when
you stop exercising for 4 seconds.
SPECIFICATIONS:
FUNCTION
AUTO SCAN
Every 6 seconds
TIME
0:00’~99:59’
CURRENT
SPEED
0.0~999.9
（
MILE/H
）
TRIP
DISTANCE
0.00~999.9
（
MILE
）
CALORIES
0.0~999.9 CAL
ODOMETER
0.0~9999
（
MILE
）
BATTERY TYPE
2pcs of SIZE AAA
OPERATING
TEMPERATURE
32°F ~ 104°F
STORAGE TEMPERATURE
-14°F ~ 140°F
