background image

 
 
TABLE OF CONTENTS 

 

BEFORE YOU BEGIN......................................................................................  1 
IMPORTANT SAFETY NOTICES..................................................................... 2 
HARDWARE IDENTIFIER.....….......................................................................  4 
ASSEMBLY INSTRUCTIONS........................................................................... 5 
EXPLODED DIAGRAM……………………………………………………………… 9 
PARTS LIST...................................................................................................... 10 
WARRANTY.................................................................................................…. 11 
ORDERING PARTS.......................................................................................… 11

 

 
 

 
 
 
 
 
BEFORE  YOU  BEGIN 

 

Thank you for selecting the MARCY  TC-3508  by IMPEX

®

  INC.  For your safety 

and benefit, read this manual carefully before using the machine.   As a 
manufacturer, we are committed to provide you complete customer satisfaction.  If 
you have any questions, or find there are missing or damaged parts, we guarantee 
you complete satisfaction through direct assistance from our factory.  To avoid 
unnecessary delays, 

please call our  TOLL-FREE customer service number.  

Our 

Customer Service Agents will provide immediate assistance to you. 

 

 

 
 
 
 
 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

support@impex-fitness.com

 

Summary of Contents for MARCY TC-3508













Reviews: