ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended two or more people assembling this machine to avoid
possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Lower Vertical Frame (#2) to the Rear Base (#4). Secure it with two M10 x 3 ½”
Carriage Bolts (#32), one U-shaped Bracket (#14), two Ø ¾” Washers (#35), and two M10
Aircraft Nuts (#33).
B.) Attach the Right & Left Stabilizers (#5 & #6) to the Lower Vertical Frame. Align the holes and
secure them with four M10 x 3 5/8” Carriage Bolts (#30), Ø ¾” Washers (#35), and M10 Aircraft
Nuts (#33).
C.) Attach the Push-up Handles (#40) to the Right & Left Stabilizers. Secure each Handle with two
M10 x 3 1/8” Allen Bolt (#41), Ø ¾” Washers (#35), and M10 Aircraft Nuts (#33).
5
Summary of Contents for MARCY TC-3508
Page 5: ...HARDWARE PACK 4...
Page 10: ...EXPLODED DIAGRAM 9...
