background image

Impex Inc.                                                                                                 www.impex-fitness.com 

15

 

EXERCISE INSTRUCTIONS

 

 

Using your 

MAGNETIC UPRIGHT 

will provide you with several benefits, it will improve 

your physical fitness, tone muscle and in conjunction with calorie controlled diet help 
you lose weight. 

 

1.  The Warm Up Phase 

This stage helps get the blood flowing around the body and the muscles working 
properly. It will also reduce the risk of cramp and muscle injury. It is advisable to do a 
few stretching exercises as shown below. Each stretch should be held for approximately 
30 seconds, do not force or jerk your muscles into a stretch - if it hurts, STOP. 

 

 
 
 
 

 

 

 
 

 

 

 
 
 

2.  The Exercise Phase 

This is the stage where you put the effort in. After regular use, the muscles in your legs 
will become more flexible.  Work to your target heart rate but it is very important to 
maintain a steady tempo throughout. The rate of work should be sufficient to raise your 
heartbeat into the target zone shown on the graph below. 
 

 

This stage should last for a minimum of 12 minutes though most people start at 
about 15-20 minutes        

SIDE BENDS   

 

    OUTER THIGH

 

INNER THIGH

 

FORWARD 

BENDS

 

CALF / ACHILLES

 

Summary of Contents for NS-908UP



















Reviews: