background image

 
 
 

TABLE OF CONTENTS 

 

BEFORE YOU BEGIN...................................................................................... 

IMPORTANT SAFETY NOTICE....................................................................... 

HARDWARE PACK……….....…....................................................................... 

ASSEMBLY INSTRUCTIONS........................................................................... 

EXPLODED DIAGRAM.........................................................................………. 

PARTS LIST…………………………………………………………………………. 

10 

WARRANTY.................................................................................................… 11 
ORDERING PARTS......................................................................................... 

11

 

 

 
 
 
 
 
BEFORE  YOU  BEGIN 

 

Thank you for selecting the Powerhouse Bench PHC 696 by IMPEX FITNESS 
PRODUCTS.  For your safety and benefit, read this manual carefully before 
using the machine.   As a manufacturer, we are committed to provide you 
complete customer satisfaction.  If you have any questions, or find there are 
missing or damaged parts, we guarantee you complete satisfaction through 
direct assistance from our factory.  To avoid unnecessary delays, 

please call 

our  TOLL-FREE customer service number.  

Our Customer Service Agents 

will provide immediate assistance to you.

 

 

 
 
 
 
 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

info@impex-fitness.com

 

Summary of Contents for Powerhouse PHC-696













Reviews: