1.
6.
2.
Measure and cut the required length of fabric tile
up-stand.
5.
4.
Decide where the pump will be installed.
This will determine the waste outlet orientation in the
next stage.
3.
Determine which corner the tray is to be fitted into.
This will establish which edges the fabric up stand
will be attached to.
Radiate Shower Tray
Installation Guide
Assemble the shallow waste to the tray using the
screw provided. Ensure the seal is positioned correctly
and do not over tighten the screw.
Ensure the waste is assembled correctly, incorrect
alignment or assembly may result in a leak.
First remove of release paper. Carefully position against
the tray and press firmly into place ensuring there are no
bubbles or creases.
We recommend using a roller to do this.
Do no stretch as you apply.
The outlet pipe needs to be bonded to the waste using
solvent cement to ensure a watertight seal.
Both components will need to have solvent weld
applied to them.
Page 2
