Download and install the free
Impossible Project App to
your iPhone
®
or iPod Touch
®
.
Search for ‘Impossible
Project’ in the App Store
SM
or
simply scan the QR code to
the far top right.
Slide the film door latch to
open the film door. Push the
film cassette all the way in.
Close the film door.
Note
Please check film pack
aging for development time,
handling and storage details.
Press and hold the eject
button for 1 second to eject
the film darkslide.
Note
Eject the darkslide only
once each time after inserting
a new film pack.
GETTING READY
Pull the tower up until all
5 sections of the tower have
clicked firmly into place.
Remove the cradle cover
that’s protecting the lens.
Launch the Impossible
Project App on your iPhone.
Choose ‘Instant Lab’ from
the menu and follow the
instructions on the screen to
choose and edit your image.
When ready, place your iPhone
on the cradle with the screen
facing down. Once in the cra
dle, the iPhone flash will turn
on. Within 3 seconds, pull the
shutter slide all the way out.
Note
iPod devices will sound
an alert instead of the flash.
After the flash goes off,
push the shutter slide back
in. Once the shutter slide
is back in, you can safely
remove your iPhone.
Press the eject button to
eject your instant photo.
Shield your photo from light
during development! See film
packaging for details.
USING THE INSTANT LAB
DONE!
THE INSTANT LAB
QUIck START
We know you are anxious to start
using your Instant Lab, but please
take a moment to read these brief
instructions before you begin.
Remove your iPhone and
replace the cradle cover
to protect the lens. Press tabs
on either side of each tower
section to collapse the tower.
1
2
3
4
5
6
7
8
9
IMP.338 IL Quickstart Manual RZ.indd 1-3
17.06.13 16:46
