XRH300-0-0-GB-08
March 2011
Page 3
DIP-switch Settings
The format selection for each type of device that can be connected to the Third-party
Port is made by setting the internal DIP-switches as indicated in Table 1.
NOTE:
Terminals ‘A’ and ‘B’ in Table 1 are on the Third-party Port Terminal Block.
DIP-switch Position
Format
Connections
0
No peripheral
Reader
N/A
1
Mifare Remote
(ImproX RRM)
Rx to terminal ‘A’
Tx to terminal ‘B’
2
RF Receiver
Data L
ine to terminal ‘B’
3
Magstripe ABA
Track 2
Data L
ine to terminal ‘A’
Clock L
ine to terminal ‘B’
4
Barcode Code-39
with Checksum
Data L
ine to terminal ‘B’
5
Barcode Code-39
without Checksum
Data L
ine to terminal ‘B’
6
Wiegand 26/37/40
and 44
0 Data L
ine to terminal ‘B’
1 Data L
ine to terminal ‘A’
7
Wiegand Open
Format
0 Data Line to terminal ‘B’
1 Data Line to terminal ‘A’
Table 1: DIP-switch Settings
NOTE:
Once the DIP-switch setting is modified reset the ImproX RH to
acknowledge the new settings.
Blank Space
