66
12916 Parts & Specifications Manual #99905833
TYPE OF INSPECTION
NOTES:
Daily and monthly inspections are to be performed by a “competent person”, who is capable of identifying existing
and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to
employees, and who has authorization to take prompt corrective measures to eliminate them.
Quarterly and annual inspections are to be performed by a “qualified person” who, by possession of a recognized
degree, certificate, or professional standing, or who by extensive knowledge, training and experience, successfully
demonstrated the ability to solve/resolve problems relating to the subject matter, the work, or the project.
One hour of normal crane operation assumes 20 complete cycles per hour. If operation exceeds 20 cycles per hour,
inspection frequency should be increased accordingly.
Consult Operator / Service Manual for additional inspection items, service bulletins and other information.
Before inspecting and operating crane, crane must be set up away from power lines and leveled with stabilizers fully
extended.
DAILY (D): Before each shift of operation, those items designated with a (D) must be inspected.
MONTHLY (M): Monthly inspections or 100 hours of normal operation (whichever comes first) includes all daily
inspections plus items designated with an (M). This inspection must be recorded and retained for a minimum of 3
months.
QUARTERLY (Q): Every three to four months or 300 hours of normal operation (whichever comes first) includes all
daily and monthly inspection items plus items designated with a (Q). This inspection must be documented,
maintained, and retained for a minimum of 12 months, by the employer that conducts the inspection.
ANNUAL (A): Each year or 1200 hours of normal operation (whichever comes first) includes all items on this form
which encompasses daily, monthly and quarterly inspections plus those items designated by (A). This inspection
must be documented, maintained, and retained for a minimum of 12 months, by the employer that conducts the
inspection.
INSPECTION CHECKLIST STATUS KEY:
S = Satisfactory
X = Deficient
(NOTE: If a deficiency is found, an immediate determination must
be made as to whether the deficiency constitutes a safety hazard
and must be corrected prior to operation.)
R = Recommendation
(Should be considered for corrective action)
NA = Not Applicable
FREQUENCY ITEM KEY
INSPECTION DESCRIPTION
STATUS
(S,R,X,NA)
D
1
Labels
All load charts, safety & warning labels, and control labels are
present and legible.
D
2
Crane
Check all safety devices for proper operation.
D
3
Controls
Control mechanisms for proper operation of all functions, leaks
and cracks.
D
4
Station
Control and operator's station for dirt, contamination by lubricants,
and foreign material.
D
5
Hydraulic
System
Hydraulic system (hoses, tubes, fittings) for leakage and proper oil
level.
D
6
Hook
Presence and proper operation of hook safety latches.
D
7
Wire Rope
Inspect for apparent deficiencies per applicable requirements and
manufacturer’s specifications.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
