background image

1

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

The Manual . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Model and Serial Numbers  . . . . . . . . . . . . . . .  1
Before Attempting to Operate This System. . .  2
Theory of Operation. . . . . . . . . . . . . . . . . . . . .  2

Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

Safety Alerts  . . . . . . . . . . . . . . . . . . . . . . . . . .  2

Notations. . . . . . . . . . . . . . . . . . . . . . . . . .  2

Practices and Laws . . . . . . . . . . . . . . . . . . . . .  2
Required Operator Training. . . . . . . . . . . . . . .  2
Safety Rules  . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Possible Sources of Danger  . . . . . . . . . . . . . .  2
Operation and Work Area Safety. . . . . . . . . . .  3
Protective Features . . . . . . . . . . . . . . . . . . . . .  3
To Stop In An Emergency . . . . . . . . . . . . . . . .  3
Maintenance and Storage . . . . . . . . . . . . . . . .  3

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

Mount the Receiver . . . . . . . . . . . . . . . . . . . . .  3

Install Receiver and Output Wiring . . . . . .  3
Mount the Actuators . . . . . . . . . . . . . . . . .  4
Attach Wiring Harness  . . . . . . . . . . . . . . .  4
Connect Electrical Wiring . . . . . . . . . . . . .  4
ME-3 Module Calibration  . . . . . . . . . . . . .  4

Install Battery Charger. . . . . . . . . . . . . . . . . . .  4
Battery Handling  . . . . . . . . . . . . . . . . . . . . . . .  4
Insert the Battery - GL and Nova. . . . . . . . . . .  4

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

Function Speed Adjustment  . . . . . . . . . . . . . .  5
Address Settings . . . . . . . . . . . . . . . . . . . . . . .  6

Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Visual Check . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Safety Checklist for Start-up . . . . . . . . . . . . . .  6
Speed Control . . . . . . . . . . . . . . . . . . . . . . . . .  7
Proportional Functions. . . . . . . . . . . . . . . . . . .  7
Optical Displays and Acoustic Signals  . . . . . .  7

Transmitter  . . . . . . . . . . . . . . . . . . . . . . . .  8
Receiver  . . . . . . . . . . . . . . . . . . . . . . . . . .  8

Frequencies and Addresses . . . . . . . . . . . . . .  8

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Changing the Battery  . . . . . . . . . . . . . . . .  9
Charging the Battery . . . . . . . . . . . . . . . . .  9

Battery Disposal  . . . . . . . . . . . . . . . . . . . . . . .  9

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .  10
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Installation / Safety Data Sheet. . . . . . . . . . . . .  12
Technical Data Sheets . . . . . . . . . . . . . . . . . . . . .13

THE MANUAL

Before operation of unit, carefully and completely read 
your manuals. The contents will provide you with an 
understanding of safety instructions and controls 
during normal operation and maintenance.

MODEL AND SERIAL NUMBERS

When contacting your dealer or 

IMT 

about service, 

repair or replaacement parts, know the model and 
serial numbers of the transmitter and receiver.
The numbers are located on the label that is affixed to 
the unit itself. Record the serial numbers here:

Transmitter

Receiver

INTRODUCTION

TABLE OF CONTENTS

Summary of Contents for 16000-SIII















Reviews: