38
IMT CAS2545 Air Compressor Manual Part No. 99904145
Maintenance Schedule
MAINTENANCE OPERATION
SERVICE INTERVAL (Hours/Months)
DAILY WEEKLY
250/3 500/6
1000/12
Air end oil level - check, add if needed
Air receiver - drain condensation
Check fittings and air lines for leaks
Inspect air/oil cooler. Clean if needed.
Air intake - inspect
Pressure relief valve - check operation
Receiver pressure relief valve - check operation
Belt tension (see Note 1)
Pressure relief valve - clean
Tighten and check all valves
Check all electrical connections
Air end oil - change (see Note 2)
Inspect drive system for wear (tension)
Air cleaner - change
Coalescer element - change
Service intervals are listed as hours/months, whichever occurs first.
Use only IMT synthetic compressor oil. The use of any other oil causes excessive carbon buildup and will void the
warranty on the compressor.
NOTES:
1) Check belt tension and condition after first 50 hours. Then, check belt tension and condition every 250 hours / 3
months.
2) Under normal operating conditions, oil changes are required every 3 months. When operating in a dirty
environment, change the oil and air filter more frequently as your particular operating conditions dictate.
Summary of Contents for CAS2545
