SECTION 5:
MAINTENANCE
99906549 rev 00 (JANUARY-2020)
5 - 1
SECTION 6: MAINTENANCE
IOWA MOLD TOOLING CO., INC.
(641) 923-3711
CAS40PL, CAS40PL-CW, CAS40PLE, CAS40PLE-CW
5.1 GENERAL
INFORMATION
The IMT CAS40PL requires routine maintenance
to ensure its proper functioning and that its opera-
tional life is not prematurely shortened. This sec-
tion contains general maintenance instructions
for normal operating conditions. However, these
maintenance actions should be performed more
frequently in excessively dusty environments, or
where the equipment will be exposed to extreme
temperature variations.
WARNING
DO NOT perform any modi
fi
cations to this
equipment without prior factory approval.
WARNING
Install, operate, and maintain this equipment in
full compliance with all applicable OSHA, other
Federal, state, local codes, standards, and regu-
lations.
WARNING
Before performing maintenance:
Shut down machine, relieve all system pressure
and lock out all power, as per the Safety Section
of this manual. If machine is hot, allow package
to cool before removing any panel.
NOTE THAT THE SYSTEM CAN BE STARTED
REMOTELY:
Always clearly tag the start-up instrumentation
against accidental system start-ups during
maintenance.
WARNING
DO NOT attempt to service the equipment while
it is operating.
WARNING
DO NOT touch electrical wires, wire harnesses,
terminals, or other components when power is
applied to the compressor unit.
WARNING
Keep metal tools, and other conductive objects
away from live electrical components.
5.2 MACHINE
MAINTENANCE
SCHEDULE
Refer to
Table 5A: Routine Maintenance Sched-
ule
. A routine maintenance schedule based on
time and/or hours logged, is given in
Table 5A
.
The intervals are determined from machine us-
age under typical operation conditions. However,
the operator must be aware that operating condi-
tions will vary depending on such things as spe-
ci
fi
c customer requirements, environmental tem-
peratures and cleanliness of the ambient air. With
this in mind, the speci
fi
cations given in
Table 5A
should be used as a guideline instead of a
fi
xed
agenda. A safe approach to routine maintenance
would be to perform the given maintenance task
more frequently under harsher conditions.
IMT
®
provides a routine maintenance parts list
in
Section 7
,
Table 7A
. Should a non-routine
part need replacement or servicing, peruse the
various parts list illustrations in
Section 7
to
help determine the exact part and part number
in question. Our parts and service departments
are ready to assist in identifying and/or replacing
non-routine parts.
For assistance in obtaining routine maintenance
or replacement parts, consult
Section 7.1, Parts
Ordering Procedure,
and T
able 7A: Recom-
mended Spare Parts List
.
Summary of Contents for CAS40PL
Page 2: ...BLANK PAGE...
Page 81: ...BLANK PAGE...
