5 - 2
99906549 rev 00 (JANUARY-2020)
SECTION 5: MAINTENANCE
IOWA MOLD TOOLING CO., INC.
(641) 923-3711
CAS40PL, CAS40PL-CW, CAS40PLE, CAS40PLE-CW
NOTE
Follow the prescribed periodic maintenance
(PM) schedule as recommended. Perform the
required PM schedule at recommended inter-
vals. Failure to follow this prescribed periodic
maintenance at the recommended intervals will
impair the package safety, performance char-
acteristics, shorten the package’s life, and will
negatively a
ff
ect the warranty coverage of the
package.
Please take a moment to become acquainted with
the following service schedule. For assistance in
obtaining routine maintenance or replacement
parts, consult
Section 7.1, Parts Ordering Pro-
cedure
, and
Table 7A: Recommended Spare
Parts List
.
5.3 REPLACEMENT
PARTS
Replacement parts should be purchased through
your local IMT
®
representative or where the com-
pressor system was purchased. If, for any rea-
son, parts are not available in this manner, they
can be purchased through IMT directly.
Iowa Mold Tooling Co., Inc.
500 Highway 18 West
Garner, Iowa 50438
Phone: 641.923.3711
Fax: 641.923.2424
www.imt.com
NOTE
If additional spare parts are being stored for
future use, make certain that they are stored
in proper containers that allow for protection
against contamination, and kept in a clean area
of moderate temperature reading. For informa-
tion on storing the machine package for periods
of non-use, consult Section 5.7, Long Term
Storage.
Summary of Contents for CAS40PL
Page 2: ...BLANK PAGE...
Page 81: ...BLANK PAGE...
