SECTION 7:
ILLUSTRATED PARTS LIST
SECTION 7: ILLUSTRATED PARTS LIST
99906549 rev 00 (JANUARY-2020)
7 - 1
CAS40PL, CAS40PL-CW, CAS40PLE, CAS40PLE-CW
IOWA MOLD TOOLING CO., INC.
(641) 923-3711
7.1 PARTS ORDERING INFORMATION
Part orders should be placed through the distributor from whom the unit
was purchased. If for any reason parts cannot be obtained in this man-
ner, contact the factory directly at the address or phone numbers below.
When ordering parts always indicate the Serial Number of the machine
package. This can be obtained form the Bill of Lading for the machine
package, or from the unit’s serial number plate. See
Figure 7-1
for loca-
tion of machine package serial plate.
Consult Table 7A: Recommend-
ed Spare Parts List
on the next page for a listing of replacement parts.
Iowa Mold Tooling Co., Inc.
500 Highway 18 West
Garner, Iowa 50438
Phone: 641.923.3711
Fax: 641.923.2424
www.imt.com
Figure 7-1: Machine Serial Plate Location
Summary of Contents for CAS40PL
Page 2: ...BLANK PAGE...
Page 81: ...BLANK PAGE...
