Electric Can Opener
USE AND CARE INSTRUCTIONS
7
HOW TO USE YOUR CAN OPENER
Opening Cans
•
Place appliance on a flat stable surface.
•
Plug into a standard 120 Volt AC outlet.
•
Lift the lever to the upright position. (Refer to the below drawing)
Caution: Be careful not to touch the blade as it is extremely sharp.
•
Place the can so that the lower edge of the can lip rests on top of the drive wheel. Be certain
that the cutting blade is on the inside of the can lip. (Refer to the below drawin
Note: This can opener should not be used to open cans designed to be opened by another method,
such as a pull tab, peel-off seal, or rolling key. This can opener will not open rimless cans or with angled
corners.
Note: If there a dent in the rim of a can, open the other end or start the cutting action just beyond the dent.
Note: Aluminium lids will not stick to the magnet.
