Distribué par / Distribuito da / Distributed by NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
2. INSTALLATION
The screwdriver is not included.
Time and lux can be set by screwdriver.
"-" means the minimum and "+" the maximum.
1- TIME
Turn the TIME knob to “- ”(clockwise) as far as it will go, the time will be the minimum (10S ±3S); Turn
the TIME knob to “+”(counterclockwise) as far as it will go, the time will be the maximum
(10min±2min).
2- LUX
Turn the LUX knob to “- ”(clockwise) as far as it will go, it will be Night mode. When ambient light <5lux
(±3lux), if there is somebody pass, the sensor work, the lamp lights up.
Turn the LUX knob to “+”(counterclockwise) as far as it will go, it will be Daylight mode. The LUX is the
Maximum (≥2000lux).
Note: When testing in daylight, turn the LUX knob to the max (Daylight mode), otherwise the
sensor light could not work.
3. EU CONFORMITY DECLARATION
The product fulfi ls the IEC standard at 220V ~, 50/60 Hz and the current RoHS requirements
4. SAFETY STANDARDS
By using the CE Mark the manufacturer or EU representative declares in accordance with EU directive
765/2008 “that the product satisfies valid requirements as laid down in community harmonisation
legislation regarding its affixing”.
