click
click
9
1-970-498-1500
www.in-situ.com
Remove the battery
cover by twisting it
counter-clockwise and
pulling down.
Press the button. All
LEDs turn on. Each LED
changes color according
to device status.
Remove the yellow tab
to allow current to flow
through the batteries.
Replace the cover.
VuLink works with Aqua TROLL, Level TROLL, Baro TROLL, and Rugged TROLL instruments.
Follow the steps below to connect an instrument and start transmitting data.
5
Attach the antenna and remove the battery pull-tab.
Press the
All Settings
button at the bottom of
the screen.
Make sure the antenna is
properly attached before
proceeding.
Tap
Cellular Network
on
the Settings screen.
Tap
2G
to change
VuLink’s network
settings. Press
Save
.
Setting Up Vulink
Never mix old and new batteries, or Lithium and alkaline batteries. Make sure all three batteries
are installed in the same orientation.
Troubleshooting Network Connectivity
If VuLink has trouble connecting to a 4G network, switching to 2G may help. Launch VuSitu and
follow the instructions below. Contact your cellular provider for coverage details.
VuLink should now
connect to a network
and sync with HydroVu
Connecting to a cellular network can take up to 10 minutes the first time VuLink powers up or
when VuLink hasn’t been powered up in several weeks or months