2020-06-29 | 0031242
Wireless TROLL Com/Wireless Rugged TROLL Com
2
6
1
5
3
4
100% - 90%
90% - 75%
75% - 50%
50% - 25%
Less than 25%
Connection status indicator
USB connection
Cable connector
Dust cover for USB connection
On/Off button
Battery charge status
indicator
Flashing red
= The Wireless
TROLL Com, instrument, and
Bluetooth-enabled device are
not connected.
Continuous red
= The Wireless
TROLL Com is connected to an
instrument, but not connected
to a Bluetooth-enabled mobile
device.
Flashing green
= The Wireless
TROLL Com is connected to the
Bluetooth-enabled device, but is
not connected to an instrument.
Continuous green
= The
Wireless TROLL Com, instrument,
and Bluetooth-enabled device
are connected.
Use the Wireless TROLL Com to connect an In-Situ instrument to a Bluetooth-enabled mobile
device and the VuSitu mobile app. The Wireless TROLL Com doesn’t have internal data storage.
It allows data transfer between an instrument and VuSitu (or Win-Situ 5 via a USB cable).
Plug your Wireless TROLL Com
into a PC for charging or setup.
Attach an instrument to the Wireless TROLL Com with a Rugged Cable
before
connecting to VuSitu. When switching instruments, you may need to
turn the Wireless TROLL Com off and on again.
Press the button once to turn
the device on or off.
Wireless Rugged
TROLL Com
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu,
Pocket-Situ, RDO, RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered
trademarks of In-Situ Inc.
©
2016. All rights reserved. This product may be covered by patents identified at www.in-situ.com/
patents
