6)
Installing the Backrest —
Slide the backrest into the
holes on the base and press
in the spring-loaded pins
until the backrest slides in
and snaps into place.
b. Press in the height adjust-
ment button and pull up on the
handle bar until the handle bars
are the appropriate height.
c. Re-tighten the height adjust-
ment knobs with enough force
that the handle bars do not
wiggle.
B. Braking
The U-Step 2 wheels will not
roll until you disengage the
brakes. Squeeze either or both
hand brake levers to disengage
the brakes. To stop, release the
hand brake levers and the
brakes will quickly engage.
— 4 —
