I
n the Garage AG – Zumikerstrasse 24, Zollikon 8702 Switzerland (V. 22/3/21)
2 / 6
Instructions
Note: It should take about 20 minutes to set up the Ultimate Car Shield/Ultimate Bike Shield once
unpacked. We recommend two people.
Only products marked “Outdoor” are for use outdoors. All other products are for indoor use only!
1.
Unfold the Ultimate Car/Bike Shield and place it where it will be located when inflated
2.
Connect one end of the
Air Hose
to the Inflate Side of the
Air Pump
3.
Insert the
Maintenance Nozzle
to the other end of the
Air Hose
4.
Place the
Maintenance Nozzle
in the lower
(2) Maintenance Valve
on the Ultimate Car/Bike Shield by
turning the nozzle thread clockwise until tight
5.
Insert the
Pressure Adapter
to the port marked “
Pressure Tube”
on the
Air Pump
6.
Insert the
Pressure Adapter
into the upper
(1) Inflate/Deflate Valve
on the Ultimate Car/Bike
Shield. Turn clockwise until it “clicks” into place.
Ensure all is snugly closed.
