In Win IW-PE689 Installation Manual Download

Page: 3 / 3

IW- PE689

Pedestal Entry Server Chassis

10. Press down the tool-free PCI clips and

remove the expansion slot cover

= Add-On (PCI/AGP) Card Installation =

8.Rear Fan installation

Connect the power cord to the Motherboard.

= FAN Installation =

9.Front FAN Installation (optional)

Unscrew the fan holder.

Put the fan on the fan holder and screw it tightly.

Put the fan holder into server case and screw it tightly. Connect the

power cord to the motherboard.

11. Install PCI/AGP Card and clip on tool-free

I/O slots

= Completing Installation =

13. Put back the front panel.

14. Put back the side panels and secure them by

Thumb Screws

= Panel Installation =

12. Take out the HDD bracket, screw the HDD

on the bracket and insert back the HDD

Bracket to the case.Refer from the M/B

Quick Reference or Manual to connect the

signal and power cable.

= Internal 3.5” HDD Installation =

Summary of Contents for IW-PE689

Page 1: ...he pictures in this installation guide are for your reference only and they may vary from the actual product 2 Remove the Front Panel Unlock the locking tabs and remove the front panel Opening the Cha...

Page 2: ...2 1 MIC_BIAS ORANGE AUD_GND BLACK 4 3 FP_OUT_R GREEN FP_RET_R YELLOW 6 5 AUD_VCC RED KEY 8 FP_OUT_L PURPLE WHITE FP_RET_L BLUE 9 IntrusionSwitchHeader AC 97 Audio Header 10 MIC BROWN AUD_GND BLACK 2...

Page 3: ...d screw it tightly Put the fan holder into server case and screw it tightly Connect the power cord to the motherboard 11 Install PCI AGP Card and clip on tool free I O slots Completing Installation 13...