- 12 -
Step 3: Install the outer rails and the brackets onto the rack.
2.5.3 Mount the chassis onto the cabinet
Step1: Make sure the ball bearing retainer is at the forefront.
Step2: Insert the inner rail to the outer rail which has already locked up on the cabinet.
Step3: Mount the inner rail onto the chassis by the direction which the arrows show on the
image.
Step4: Step4: Use 2 M6 screws to fix the handle bracket on the rack.
2.6
Installing Motherboard
Before installing the motherboard, preparing the IO shield for your motherboard, and mount it to
the system IO window 1.2.2 shows. If you cannot find the IO shield, please check with your
motherboard vendor, or contact In Win for IO shield production service.
Step 1: Measure the motherboard location and removing the plastic dots to appear the holes.
Step 2: Install the steel pillars, which you can find in the accessories box to the holes matching
the motherboard’s mounting holes, you may use a flathead screw driver.
Step 3: Place the motherboard down to the chassis, and make sure the pillars’ threaded holes are
matching the mounting holes on the motherboard.
Summary of Contents for IW-RF100
Page 1: ...IW RF100S User s Manual...