14
NOTE:
1. The unit supports InWin PSU modules only, please do not attempt to insert any
other brands of modules.
2. The two PSU modules’ output wattage must be the same.
2.5
I
nstalling Slide Rail
The IW-RS248-03 is a rackmount model, which support EIA-RS310D standard cabinets
and chassis racks. InWin provides standard slide rails to let users mount the chassis on
to the cabinets.
2.5.1
Identifying the Slide Rail
The slide rail by your order might be different. You can reference the quick
installation guide inside the slide rail package, and follow the instructions to
mount the rail on to your cabinet or chassis rack.
2.5.2
Take out the Inner Rail and Slide the Intermediate Rail Back
Step 1: Pull out the inner rail until it reaches the stop. Release the blue slide tab to
unlock.
Step 2: Continue pulling the inner rail until the second stops. Release the white
slide tab to remove the inner rail.
Step 3: Pull the latch on the middle rail upward and retract the middle rail back.
Push
Press
