-
15
-
2.5.3 Mount the chassis onto the cabinet
Step1: Make sure the ball bearing retainer is at the forefront.
Step2: Insert the inner rail to the outer rail which has already locked up on the cabinet.
Step3: Mount the inner rail onto the chassis by the direction which the arrows show on the
image.
Step4: Pull up the plastic chip on the chassis’ handles, and tighten the thumb screws to fix the
chassis
2.6
Installing Motherboard
Before installing the motherboard, please find the IO shield form your motherboard package, and
install it to the system IO window 1.2.2 shows. If you cannot find the IO shield, please check with
your motherboard vendor, or contact In Win for IO shield OEM service.
Step 1: Measure the motherboard location and removing the plastic dots to appear the holes.
Step 2: Install the steel pillars, which you can find in the accessories box to the holes matching
the motherboard’s mounting holes, you may use a flathead screw driver.
Step 3: Place the motherboard down to the chassis, and make sure the pillars’ threaded holes are
matching the mounting holes on the motherboard.
Step 4: Use hex screws from the accessories box to fix the motherboard in the chassis.
Summary of Contents for IW-RS316-02M
Page 1: ...IW RS316 02M User s Manual...