11
POS
ITI
O
N
AD
JU
S
T
M
E
NT
RECLINE
LEG REST
How to Sit
When the chair is off, the rollers are normally drawn back into the left and right sides of the upper part of the
seat back (Storage Position). For safety reasons, first check the positions of the rollers. If they are in any position
other than storage positions, set the main POWER switch to ON before sitting down to allow the rollers to
return to their storage position. When you finish checking, sit down slowly in the center of the seat.
Caution
●
Do not sit down on the chair with the leg rest raised.
→
Any sudden heavyweight on the leg rest could cause damage to the mechanism. Or, accident or injury
may result if the chair tips over.
●
Before using, raise the reclining seat back to its fully upright position. Then recline the seat back slowly to
the most comfortable position, remembering to start off with a lighter massage.
How to Use the Reclining Seat Back
■
To raise the reclining seat back:
Press and hold the RECLINE [ ] button on the remote control. Release the button when the seat back
reaches your desired position.
The button may be released after 2 seconds and the chair will continue to auto-restore to the upright
position.
■
To lower the reclining seat back:
Press and hold the RECLINE [
] button on the remote control. Release the button when the seat back
reaches your desired position.
The button may be released after 2 seconds and the chair will continue to auto-recline to the full reclined position.
●
The leg rest is raised in conjunction with the movement of the reclining seat back. As soon as reclining of the seat back stops, the
leg rest also stops.
●
If the main POWER switch at the back of the chair is set to ON, the reclining angle of the seat back can be adjusted.
Warning
●
Make sure no one, especially children or pets, is in the way when lowering the reclining seat back.
Be careful not to stand or place any object behind the seat.
How to Use the Leg Rest
■
To raise the leg rest:
Press and hold the LEG REST [
] button on the remote control.
The button may be released after 2 seconds and the leg rest will continue to raise.
■
To lower the leg rest:
Press and hold the LEG REST [
] button on the remote control.
The button may be released after 2 seconds and the leg rest will continue to lower.
●
If the main POWER switch at the back of the chair is set to ON, the angle of the leg rest can be adjusted.
Warning
●
Make sure no one, especially children or pets, is in the way when lowering the leg rest.
Be careful that people and/or objects are not caught under the leg rest.
●
Do not release hands suddenly while lifting the leg rest by hand.
Caution
●
Do not place anything other than legs and feet on the leg rest.
POSITION ADJUSTMENT
