18
PR
E
S
E
T
PR
O
G
R
A
M
S
Caution
●
Keep massage sessions to no more than 15 minutes in length. Area Specific Massage of any particular area
on the body to no more than 5 minutes.
→
Continual use for extended periods of time can result in over-stimulation, which could cause the opposite
of the desired effect, or even injury.
Set 30 minutes in total for reference per day and keep appropriate intervals between each massage
session.
* For children aged 14 years or over, use only the Youth Program and only one session per day.
❶
Press the POWER button.
If no selection is made within 2 minutes, the power will
automatically shut off.
❷
Press the desired button.
●
Press and hold the program button for 2 seconds
selects the Deep Relaxation version of the massage
course.
●
If you desire you can combine a sequence of 2
programmed massage courses by following these
steps: after selecting your first programmed Massage
Course, immediately select your second massage
course choice while all the buttons on the remote
are flashing. You have about 5 seconds to select
your second programmed course. When 2 massage
programs have been strung together, the button of
the first selected course is glow continuously while
the second selected course flashes intermittently.
Note: the youth course cannot be part of a combined
massage.
●
Once a programmed course is selected the chair will
automatically reclined to a massage starting position.
❸
The ROLLER positions can be
adjusted.
With the ROLLER buttons, the vertical position of the
rollers can be adjusted. If no adjustment is required, do
not use these buttons.
❹
The program starts.
The progress of the program is indicated on the display
of the remote control with the program name.
* The progress of the program may not be indicated if the
operation is combined with other operations.
❺
Program completed.
When the massage program finishes, the rollers return
to their storage positions (upper part of the seat back).
Then the power to the remote control is shut off.
However, reclining of the seat back, angle adjustment
of the leg rest, and ON/OFF of the heater are still
enabled.
When 2 courses have been combined, at the conclusion
of the first selected course, the second selected course
commences and the button for the second course
changes from flashing intermittenly to a steady glow.
The second course then commences.
