10
[BEFORE USE]
How to Transport or Move the Chair
Before moving the chair, turn off the main power, unplug the power plug from the wall outlet, and also disconnect the
power cord connector from the power connector on the chair.
To Move with the Wheels
To Carry
Raise the reclining seat back to its upright position, hold
the sides of the leg rest, and then move the chair on the
wheels by lifting and holding up the front part of the chair.
Fully recline the seat back and carry the chair by holding
the handle on the upper part of the back cover and the
sides of the leg rest.
■
The chair is very heavy, so be careful not to hurt your lower back when transporting or moving it.
■
The remote control is attached to the chair, so make sure that it does not fall when moving the chair.
Caution
●
Do not move the chair while someone is in it.
●
Before moving the chair, turn off the main power, unplug the power plug from the wall outlet, and also disconnect the power
cord connector from the power connector on the chair.
→
The power cord may be damaged, resulting in fi re or electric shock.
Main Power Connection
①
First, plug the power
cord into the cord
connector located at the
front right of the chair.
Then, plug the other end
into the wall outlet.
②
Set the main POWER
switch located on the
right side of the chair set
to ON.
* If the main POWER switch is turned ON while the rollers are stopped partway, they will automatically return to the starting position (upper part of the
seat back) and then stop.
Warning
Caution
●
Do not use with any type of transformer device.
→
May result in damage to the chair or electric shock.
●
Before plugging the power cord into the wall outlet, make sure that the power
switch is set to OFF.
●
Make sure that the plug on the power cord is inserted fully into the wall outlet.
●
Before using the chair for the fi rst time, turn on all the switches in order
as indicated in this Operating Manual to check that the chair is operating
properly.
Summary of Contents for Flex 3s HCP-S373A
Page 31: ......
