15
While making sure there is nothing in the surrounding area, return the reclining seat back
to its upright position and lower the leg rest to its lowest position.
Turn off the main POWER switch on the front right of the chair!
Unplug the power plug from the wall outlet. This will save energy because no standby power
will be consumed.
Caution
●
Be sure to turn the main POWER switch to off after every use and to unplug the power plug from the wall outlet.
→
An accident or injury may result if children or pets play with the chair.
●
After using the chair, be sure to return the reclining seat back to its upright position and lower the leg rest to its lowest
position.
●
Wipe the chair off after every use, and store the chair in a place with low humidity.
●
Hold the power plug when unplugging from the wall outlet. Do not pull on the power cord.
●
If the chair is left unused for a while, be sure to unplug it from the wall outlet.
●
Be careful not to tangle yourself in the cords and trip over.
How to Use the Reclining Seat Back
■
To raise the reclining seat back
Press the top RECLINE button to raise the reclining seat back.
■
To lower the reclining seat back
Press the bottom RECLINE button to lower the reclining seat back.
Reclining Movement Range
Warning
●
Make sure no one, especially children or pets, is in the way when lowering the reclining seat back. Be careful that people
and/or objects are not caught behind the reclining seat back.
The chair reclines up and down in conjunction with the movement of the seat back and leg rest.
If it stops mid-operation, press the button again.
Hold the button for about 2 seconds to raise (or lower) the
reclining seat back automatically
*
.
POSITION ADJUSTMENT
AFTER USE
How To Use The Heater
Press the Heat button to turn on the heater.
The button light also turns on.
Press the button to turn the heater on or off .
[POSITION ADJUSTMENT
]
[AFTER USE]
*The seat back and leg rest move to their maximum positions and then stop.
Hold Function
Summary of Contents for Flex 3s HCP-S373A
Page 31: ......
