17
❹
Preset Session Massages
●
6 automatic sessions provide a variety of diff erent massages to relieve fatigue.
●
With the preset session buttons, you can choose your favorite session to give you a massage according
to the preset menu.
PRESET SESSIONS
❶
Press the
button.
If no session is made within 5 minutes, the power shuts off
automatically.
❷
Press the desired session button.
The chair will recline for a short time. Then, the
shiatsu point locator indicator turns on and
shiatsu point locating is performed.
[Note]
Sit as far back as possible in the chair and put
your head against the headrest in a relaxed
manner. Shiatsu points cannot be accurately
located if you are not properly seated.
❸
The shoulder positions can be adjusted.
After the shiatsu points are located, the ROLLER buttons fl ash.
The shoulder positions can be adjusted while the buttons fl ash. If
no adjustment is required, do not use these buttons.
▲
The rollers move up
while this button is
pressed.
▼
The rollers move down
while this button is
pressed.
Shoulder Position Adjustment
If the shoulder position is not correct, adjust the shoulder position while the
ROLLER buttons are fl ashing.
Too High
Too Low
Correct
Position
❶
❷
❷
❸
❹
❹
The session starts.
When shiatsu point locating is completed, the Complete light turns on
and the session starts. During operation, you can adjust the mechanical
intensity, adjust the air intensity or cancel the air operation.
[PRESET SESSIONS]
Mechanical Intensity Adjustment
The mechanical intensity can be adjusted in 3 levels.
Each time the button is pressed, the intensity changes in the order of
Low, Medium
and
High
.
(The default setting when the session starts is Medium.)
Max
Mode
The intensity can be changed in the order of
Low, Medium
and
High
even when Max
Intensity mode is ON.
(The default setting when Max Intensity mode starts is High.)
Summary of Contents for Flex 3s HCP-S373A
Page 31: ......
