inada Flex 3s HCP-S373A Operating Manual Download | Manualshive

Page: 7 / 32

background image

6

Remote Control

①

Button

Turns the remote control power ON and OFF. Pushing the
POWER button while the chair is activated causes the
rollers to return to the starting position, after which the
chair turns itself off .
The button lights in green while the power to the remote
control is ON, lights in orange while the power is OFF, and
fl ashes in red while the chair is stopped in an emergency.

②

EMERGENCY STOP Button

Use this button to shut the chair off immediately in an
emergency or if there is a malfunction during operation
of the chair. The rollers will stop immediately.

③

Roller Position Display

The position of the roller during the massage is
displayed.

④

Shiatsu Point Locator
Indicator

A light indicates when the shiatsu point locator is
operating and when the operation has fi nished.

⑤

Max Intensity Mode Button

Selects Max Intensity mode.

⑥

Preset Session Buttons 1

Selects the corresponding session.

⑦

Leg Rest Button

Use to adjust the angle of the leg rest.

⑧

Reclining Button

Use to adjust the angle of the reclining seat back.

⑨

ROLLER-Position Adjustment
Buttons

Use to adjust the shoulder position while the shiatsu
point locator is operating, and to adjust the roller
position during manual session mode.

⑩

Preset Session Buttons 2

Selects the corresponding session.

⑪

Intensity Adjustment Buttons

Adjusts the mechanical and air massage intensity.

⑫

Focused Sessions Buttons

Special operations can be selected.

⑬

Manual Sessions Buttons

Basic operations can be selected.

⑭

Air Massage Buttons

Selects among arm, back or leg air massage.

*

These 3 air massage types can all be selected at the
same time.

⑮

Automatic Raise Cancel Button

The automatic seat reclining raise operation when the
session is completed can be set ON/OFF.

⑯

Hand and Foot Heater Button

The hand and foot heater can be switched ON/OFF.

Warning

●

Do not spill water and/or other liquids on the remote control.

●

Do not handle the remote control with wet hands.

Caution

●

Do not sit on the remote control. Do not drop or step on the remote control. Do not pull the remote control cord forcibly.

●

Do not use pointed or hard objects to push the buttons.

→

May result in damage to the remote control.

Remote Control/Inside the Panel

①

②

④

⑧

⑨

③

⑤

⑥

⑦

⑭

⑫

⑪

⑩

⑯

⑮

Panel

[C

OMPONENT

S & DESCRIPTION]

⑬

«
...
5
6
7
8
9
...
»

Summary of Contents for Flex 3s HCP-S373A

































Reviews:

No comments

Related manuals for Flex 3s HCP-S373A

Brand: beoka Pages: 14

Brand: Cenocco Pages: 5

Brand: la rose Pages: 9

Brand: Imetec Pages: 57

Brand: Pure-therapy Pages: 13

Brand: Kalorik Pages: 9

DARTWOOD Foot Massager with Heat and Deep...

Brand: Wasserstein Pages: 6

Brand: Lifepro Pages: 11

Brand: König Electronic Pages: 52

Brand: Okoia Pages: 23

Brand: KYOTA Pages: 2

Wellbeing Trigger Point Massage Ball

Brand: Gaiam Pages: 2

Brand: nimble Pages: 8

Brand: NIMBL Pages: 8

Brand: Ashley Pages: 23

Brand: Westinghouse Pages: 21

Brand: Westinghouse Pages: 22

Brand: Therabody Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands