inada HCP-G900, Operating Instructions Manual

15

Mechanism Position

Healthcare Programs

Full Body Quick

Full Body 

Active

Calm

Intensity

Cancel

Vibe

Sound

Auto Upright

Shiatsu

Point

Detecting

Complete

Recline

Roller

Hi

Med

Lo

Special Programs

Full Stretch

Each Region Programs

Seat

Foot

Leg

Low Body Revive

Calm Vibes

Youth

Shoulder

Low Back

EMERGENCY

STOP

[HO

W T

O

 OPER

A

TE]

1 Press the   button.

If no selection is made within 5 minutes, the power shuts off  
automatically.

2 Select the desired program. 

The reclining seat back moves until 
it reaches the 

*

zero gravity angle. 

Then, the shiatsu point locator 
indicator turns on and shiatsu 
point locating is performed.
[Note]

Sit as far back as possible in the 
chair and put your head against the 
headrest in a relaxed manner. Shiatsu 
points cannot be accurately located if 
your body is raised.

Sound

Press the sound button, and 

audio information about the 

selected course is heard.

3 The shoulder positions can be adjusted.

After shiatsu point locating is performed, the shoulder positions can 
be adjusted while the locating indicator is fl ashing. If no adjustment 
is required, do not use these buttons. 

(Shiatsu point location is not performed 

in the Foot program.

）

4 The program starts.

When shiatsu point locating is completed, the Complete light turns 
on and the program starts.
Massage adjustments can be performed while the program is 
running. 

5 Program completed.

When the program is completed, the mechanism returns to the 
storage position (leg section). The seat back then raises, and the 
remote controller power switches off . 
During storage, the Power lamp fl ashes green. 

Caution

●  

If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If you still feel the 
massage is too strong, stop using the chair and contact the vendor (details on back cover). 

→

May result in injury if you continue use with high stimulation under such circumstances.

●

  Do not place your hands or feet into the mechanism tracks, or moving parts when reclining the seat. Do not sit wearing 

hard objects, such as hair accessories, necklace, watch, bracelet, or ring.

●

 If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.

HOW TO OPERATE

Changing Programs

You can change to another course while another course is running, without waiting for the course to complete. 
However, after a total duration of 30 minutes, the course in progress stops even if not completed.

Stopping in the Middle of a Massage

To stop mid-massage, press the 

 button. The rollers return to their storage positions and stop.

In an emergency

 or 

if there is some malfunction during the operation of the chair,

 press the Emergency stop button. The 

rollers will stop immediately. After confi rming safety, press the 

 button. The rollers return to their storage positions and stop. 

Starting a Massage

With the preset program buttons, you can choose your favorite program to give you a massage according to the preset 
menu.

*

Zero Gravity Angle

This is a reclining angle 
that puts the least 
amount of stress on 
muscles, giving the 
image of weightlessness. 

When the program is changed during a diff erent program 

The mechanism moves to the fi rst detected shoulder position. If you feel that the shoulder position is 
out of place, adjust the shoulder position while the searching lamp is fl ashing. 

(Shiatsu point location is 

not performed in the Foot program.)