Turn “ON” the main power switch on
the main unit.
2
•
The main power switch is located on the
back side of the main unit.
The tablet screen is displayed.
3
•
After the elapse of a certain period of
time with no operation being performed,
the screen turns black. Press the “ON/
OFF” button, or touch the screen to re
-
turn to a bright state.
Check the main unit
Make sure to check that the fabric of the main unit is not torn.
1
•
Before use, make sure to check that the fabric of the main unit is not torn. Also, make sure to check that the
fabric of other parts is not torn.
•
However small a break, immediately stop using the product, disconnect the power plug, and contact your local
distributor.
Never remove the fabric of the main unit or use it in a torn state as it is very dangerous.
Make sure that no foreign objects are
caught in the main unit.
2
•
Make sure to check that no foreign objects are
caught in the main unit before use.
May cause an accident or injury.
Mechanism stowed positions
•
Back mechanism … Top of the backrest
•
Arm mechanism … Open state in front of
the armrests
•
Calf mechanism … Open state
•
Sole mechanism … Open state
Make sure to check that each mecha-
nism is in its stowed position.
3
•
Make sure that each mechanism is in the stowed
position before sitting down.
May cause an accident or injury.
•
When the footrest is not fully lowered, do not sit
down, stand, or place an object on the footrest.
May cause an accident or injury.
Make sure to check that the backrest
is fully raised and the footrest is fully
lowered.
4
•
Do not sit in the chair while the footrest is raised.
An impact may be applied to the footrest causing a malfunction. Also, an accident or injury may result in the case of the main unit overturning.
•
Before use, fully raise the backrest.
Precautions for getting in/out of the chair
•
Do not subject the tablet stand or armrests to strong impacts or lean against it.
Overturning may cause an accident, injury, or a malfunction.
•
If the arm mechanism and/or footrest is in operation, wait for the operation to stop, and then get in/out of the chair.
•
Do not sit down on the footrest while it is raised.
•
Never get in/out while each mechanism is moving
because it is very dangerous.
May result in injury or a malfunction.
•
We recommend use of this product for persons
weighing 100kg (220 lbs.) or less.
When a person weighing 100kg (220 lbs.) sits in the
chair, a load of approximately 1.9kg (4.2 lbs.) is ap
-
plied to the floor per 1cm
2
(0.16 in
2
).
•
Before use, make sure to check that the fabric is not
torn.
•
The withstand load of the armrests is approximately
30kg (66 lbs.).
•
The tensile load of the armrests is approximately
30kg (66 lbs.).
•
The withstand load of the footrest is approximately
30kg (66 lbs.).
How to sit down on the chair
Normally, each mechanism is in a stowed state.
Back mechanism … Top of the backrest; Arm mechanism … Open state in front of the armrests; Calf
mechanism … Open state; Sole mechanism … Open state
For safety, check each mechanism position before sitting down, and if it is not in a stowed state, do not
sit down immediately but turn on the main power switch to return each mechanism to the stowed state,
and then slowly sit down in the center of the chair.
Make sure to check that the footrest
is fully lowered, and then put your feet
into the sole unit.
Sit down in the center of the seat and
sit back slowly.
Get in/out of the chair by placing your
hands on the seat.
1
2
3
Main power switch
ON
OFF
Warning
Warning
Caution
Caution
Caution
Caution
Caution
Befor
e Use
Befor
e Use
Continued
(Before Starting Massage)
6
7
