OPERATION MANUAL
PREMIUM USB CAR POWER ADAPTER QC 5/9/12V
in-akustik GmbH & Co. KG
Untematten 12-14
79282 Ballrechten-Dottingen
GERMANY
Tel.: +49 (0) 7634 5610-70
Fax.: +49 (0) 7634 5610-80
E-Mail: info@in-akustik.com
Web: www.in-akustik.com
r
MADE IN
GERMANY
OPERATION MANUAL
AC-1502 | AC-1502-P6 | AC-2502-P8 | AC-2502-SF
The Referenz power cords and mains connection cables are equipped for this demanding task and is designed to connect high-quality hi-fi and high-end audio systems.
Hand-made in Germany: Like all loudspeaker and audio cables in the Referenz series, the power cords and mains connection cables are manufactured in Germany and tested to ensure it functions perfectly.
OPERATION
If your system consists of several components, we recommend measuring the phases of the sockets to which you connect your hi-fi devices. The aim is to attain a potential difference between the signal
masses of the devices that is as low as possible and thereby low compensating currents via the signal cable. To measure the phases, the devices are initially only connected to the mains power supply and
switched on without being connected to each other. Then the potential between the signal masses (e.g. earth contact on the cinch sockets) is measured. After turning the mains plug round and repeating the
measurement, you can determine in which position the potential is lowest. Observe the operating instructions of the devices in this regard and ask your specialist retailer.
NOTE:
Before you connect the devices with each other, it is vital that they are switched off and disconnected from the mains power supply.
Now connect the devices with each other. Please note the operating instructions of the devices. Plug the mains power cable first into the device and then into the socket. If you are using a socket strip, insert
the plug of the socket strip into the power supply socket last.
TECHNICAL DATA
SCHUKO -> C13/C15: 10 A 250 V AC
SCHUKO -> C19: 16 A 250 V AC
US-NEMA 5-15 -> C13: 10 A 125 V AC
US-NEMA 5-15 -> C19: 15 A 125 V AC
Temperature range: 0 – 40°C
NOTES
Simplified EU Declaration of Conformity
Hereby, in-akustik GmbH & Co. KG declares that the equipment typ is in compliance with Directive LVD 2014/35/EU and RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.in-akustik.com
Important remark:
•
Please also refer to further remark about this product on our homepage www.in-akustik.com.
•
This product is NOT intended for the United States of America or territories that belong to the USA, and m
Misc
Indication without guarantee. All product images similar. We reserve the right to make changes.
01085D42
