SNMP Configuration
181
Figure 20-2: AdventNet MibBrowser Settings Button on the Toolbar
By default the MIB description display and the result display are visible in the MibBrowser.
20.11.2 Using the TrapViewer
TrapViewer is a graphical tool to view the traps received from one or more SNMP agents running on
a SmartNode 1000 or 2000 series device. The TrapViewer can listen to one or more port at a time and
the traps can be sent from any host. SmartNode 1000 or 2000 series device send their traps to the
SNMP standard port 162.
Invoke the TrapViewer through the usage of the MibBrowser. To get to know more about the
MibBrowser refer to Chapter 20.11.1, “Using the MibBrowser” above. In Figure 20-3 depicted below
is a screen shot of the TrapViewer.
Figure 20-3: AdventNet TrapViewer displaying received Traps
The TrapViewer has a table that depicts the trap information, the common parameters text fields
where necessary information has to be entered and other options such as Start, Stop, Trap Details,
Delete Trap and ParserEditor.
Follow these steps to work on the Trap Viewer and to know more about the available options:
•
By default the value in the
Port
text field is 162. Enter the desired port in the field on which
the viewer will listen.
•
The default value in the
Community
text field is public. Set the community of the incoming
traps as desired, depending on the SNMP configuration of your SmartNode 1000 or 2000
series device.
Software Configuration Guide Release 2.10, Revision 1.00
Summary of Contents for SmartWare Release 2.10
Page 2: ...2 Legal Notice Software Configuration Guide Release 2 10 Revision 1 00...
Page 15: ...Terms and Definitions 15 Software Configuration Guide Release 2 10 Revision 1 00...
Page 218: ...218 PPP Configuration no shutdown Software Configuration Guide Release 2 10 Revision 1 00...
Page 272: ...272 Tone Configuration Software Configuration Guide Release 2 10 Revision 1 00...
