Basic System Management
79
Software Configuration Guide Release 2.10, Revision 1.00
necessary switch to another CLI version. The idea of having several CLI version available on a
system is mostly to offer reduced or enhanced command sets to users.
Mode
Operator execution
Command
Purpose
Step 1
node
>show uptime
Display the time since last restart.
Example:
The following example shows how to display the uptime of your device, if you start from the
configuration mode.
SN>
show uptime
The system is up for 1 days, 23 hours, 44 minutes, 18 seconds
10.8 Configuring and Starting the Web Server
SmartNode includes an embedded web server, which can be used together with a customer-specific
Java applet that must be downloaded into the persistent memory region of your SmartNode. Applets
are similar to applications but they do not run as standalones. Instead, applets adhere to a set of
conventions that lets them run within a Java-compatible browser. With a Java applet, custom-specific
configuration tasks of SmartWare are possible using a browser instead of accessing the SmartWare
CLI via Telnet or the serial console.
Without a Java applet the value of the embedded web server is limited. Contact Inalp Networks AG
for any questions about custom designed Java configuration tools for SmartWare.
Procedure
To set the web server language and the listening port.
Mode
Configure
Command
Purpose
Step 1
node
(cfg)#webserver lang {
de
|
en
}
Sets the language to either German (de) or English
(en)
Step 3
node
(cfg)#webserver port
number
Sets the listening port number in the 1 to 65535,
default port number for web server is 80
Example: Configuring and Starting the Web Server
The following example shows how to set the web server language and the listening port of your
device, if you start from the configuration mode.
SN(cfg)#
webserver lang en
SN(cfg)#
webserver port 80
10.9 Determining and Defining the active CLI Version
SmartWare allows having a number of CLI version installed together, whereas only one CLI version
is activated. There are commands available to determine the currently running CLI version and if
Summary of Contents for SmartWare Release 2.10
Page 2: ...2 Legal Notice Software Configuration Guide Release 2 10 Revision 1 00...
Page 15: ...Terms and Definitions 15 Software Configuration Guide Release 2 10 Revision 1 00...
Page 218: ...218 PPP Configuration no shutdown Software Configuration Guide Release 2 10 Revision 1 00...
Page 272: ...272 Tone Configuration Software Configuration Guide Release 2 10 Revision 1 00...
