6
2. After a long time of use, some dust or other dirt may be accumulated at the air entry/air vent. The
induction cooker body shall be cleaned lightly with flexible dry cloth. The dust around the air entry and
air vent can be cleaned with a flexible brush or cleaner.
Note: never wash using water.
3. When the ceramic panel is stained, clean with soft wet cloth dipped in little toothpaste or neutral
detergent and clean with soft wet cloth until no residue exists.
4. When not in use for a long time, please unplug the unit, and protect against dust and insects.
It is better not to use other substitutes (especially pressure vessels and pots) so as to avoid any
unfavorable influence on operational performance.
If using other pots, please observe the following conditions:
* Requirement for pot materials: containing magnetic conductivity materials;
* Shape requirement: plat bottom, with the diameter between 12 -26 cm.
Note: to achieve a better result, please use standard pots or kettles.
SUITABLE POTS
JUDGMENT OF ABNORMALITY
PROBLEM
CHECK POINTS
A
C
E
F
D
B
G
Stainless
steel pot
Enamel cooking
utensils
Iron kettle
Enamel stainless
steel kettle
Iron oil frying pan
Iron pan
Iron plate
•
Whether the plug is inserted tightly?
•
Whether the switch, socket, fuse and power cord are
in good condition?
•
Whether the pot contains nonconforming materials?
•
Whether the unit is in preset condition?
•
Other reasons. Please send it to a service facility for
repair?
After power is supplied, the “ON/OFF”
indicator light fail to light up.
The “ON/OFF” indicator lights up, but
heating does not start.
