3
Important Instructions
1. Please read operating instructions before using the appliance.
Do's
1.
Before plugging the socket ensure that the supply voltage is in accordance with the rated
one.
2.
Place the appliance on a stable, level and heat resistant surface, away from hot surfaces and
naked flame.
3.
The kettle becomes hot during use. So hold it by the handle only.
4.
Ensure that the main cable does not hang over the sharp edges and keep it away from hot
objects and open flames.
5.
Always make sure that lid is properly closed during the boiling operation.
6
Keep the appliance away from the children.
7.
Keep the connector base away from dampness and splashes.
8.
In case of any defect, contact the nearest authorized dealer/ service centre.
Don'ts
1.
Do not overfill! Check the level indicator (MAX) on the main body while filling water. If
the kettle is overfilled, boiling water may be ejected.
2.
Do not remove the kettle from its connector base while in operation. Switch OFF the
appliance first.
3.
Do not remove the lid while the water is boiling.
4.
Never leave the kettle unattended during operation.
5.
Do not operate the kettle if the cord plug shows the signs of damage.
6.
Do not immerse the kettle in water.
Before First Use
1.
After unpacking the unit and before any use, make sure the mechanical parts of the kettle
and all its attachments are not damaged.
2.
Clean the kettle by filling it with clean water and bringing to boil. Pour away the water
afterwards.
3.
Carefully go through the instruction manual before starting the boiling operation.
How to Use
1.
Wind out the main cord only as much as necessary. Draw it out through the opening in the
base and connect it to a suitable main socket.
2.
Open the lid and pour in water of desired quantity. While doing so, watch the water level
mark inside the kettle. Never go below the minimum or above the maximum (MAX.)
mark.
