background image

 

6

Operating your Unit

TEMPERATURE CONTROL

•   Your freezer has one control for regulating 

the temperature. The temperature control 

is located on the lower right hand corner.

•   The range of the temperature control is 

from position” 1” the warmest to “6” the 

coldest.

    Adjust the temperature control to the 

setting that best suits your needs. The 

setting of “4” should be appropriate for 

home or office freezer use.

Note: If the unit is unplugged, lost power, 

or turned off; you must wait 3 to 5 minutes 

before Restarting the unit. If you attempt to 

restart before this time delay, the freezer will 

not start.

Large amounts of food will lower the 

cooling efficiency of the appliance. If you 

choose to change the thermostat setting, 

adjust thermostat control by one numerical 

increment at a time. Allow several hours 

for temperature to stabilize between 

adjustments.

DEFROSTING YOUR CHEST FREEZER

•   For the most efficient operation and 

minimum energy consumption, defrost 

the freezer when the frost on the freezer 

walls is excessive or 5 to 10 mm thick. To 

minimize disruption, choose a time when 

the stock of frozen food is low.

Important! Do not use boiling water because 

it may damage the plastic parts. In addition, 

never use a sharp or metallic instrument 

to remove frost as it may damage the 

cooling coils and will void the warranty. 

We recommend using the plastic scraper 

provided with your unit.

•   Remove the frozen food from the freezer 

and place it in a cooler to protect the food.

•   Unplug the freezer. The Power Supply light 

should be off (green light out).

•   During defrosting, the ice melts into the 

cabinet.

•   Remove the drain plug on the inside floor 

of the freezer by pulling straight out.

•   Place a shallow pan outside drain outlet. 

The defrost water will drain out.

•   Check the pan occasionally so the water 

does not overflow.

•   Clean the interior of the freezer.

•   Replace the plug on the inside floor.

•   Reset the thermostat to desired setting.

•   Allow the cabinet to cool for one hour.

•   Switch on the temperature control to the 

highest setting for two hours before using, 

and then adjust to normal level.

•   Return food to the freezer.

Helpful Tip! 

Defrosting usually takes a few 

hours. Leaving the door open will help speed 

the process. Also, pouring warm water (not 

boiling) on the ice/frost will help speed 

melting. If you must use a scraper- please 

use caution - it is very easy to damage 

the freezer compartment and void your 

warranty.

Summary of Contents for ICF198W















Reviews: